How To Drain A Hot Tub Properly

How To Drain A Hot Tub Properly. Add 1 bottle of dazzle drain prep to clean the hot tub plumbing. Flush the lines to remove bacteria and biofilm.

How To Properly Drain and Refill your Hot Tub AquaTech from aqua-tech.ca

During future use, you may not need to run your pumps for as long. Turn the power back on and add your pool chemicals. This will allow the water to drain from the lines.

Unlike Other Appliances, The Pump Is Not Operated By Immersion In Water;

The second step to drain and refill your spa. Then remove the hard thermal cover and drain out the spa. Fresh water yields are most comfortable.

Be On The Lookout For Damage Due To Wear And Tear, Pests, And Chemical Imbalance.

Remove the front panel of your hot tub and locate the hose spigot. Around 20 minutes may be enough. Open the valve to drain the hot tub.

This Process Provides A Great Opportunity To Cle.

After draining the spa, you are ready to connect the hose to the external spigot. Once you are finished, remove the cover again. If water isn’t draining properly through the spigot, you might need to use a water safe vacuum to finish the job.

Wipe Down Any Debris You See, And Simply Flush The Water Through.

Besides safety reasons, this step is essential in preventing the pump motor from breaking. Finally, reconnect your power source and turn the hot tub back on to begin circulating the water. You should check the ph scale during this time, making sure that it is at the perfect level.

Attach A Water Hose To Direct The Draining Water.

So to drain your tub, insert the pump into the water and turn it on so that it can. Inspect your hot tub’s hardware and wiring. When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage.

Leave a Reply

Your email address will not be published.